Orthopedic penis enlargement devices have been used by men for over a decade and have proven to be positive. The most used device is called an extender, which is translated from English as expander or filler. This fully reflects its purpose. It is characterized by simplicity of design and assembly, which allows a person to use both a purchased (factory) extender and a homemade extender. It's very easy to do. The main thing is to have the necessary materials and basic knowledge about the mechanics of the intimate apparatus.
Types and effect of extenders
The device works on the principle of proliferation of corpora cavernosa. This occurs under the condition of regular tension of the tissues due to the periodic unwinding of the axes in the direction of increasing length. The growth of new tissue does not stop as cells divide under the constant influence of the distracting force.
Average growth rates, according to user and manufacturer reviews, are an increase in length of 2 to 5 centimeters over a period of 6 to 10 months. You shouldn't expect instant results. Patience and regular use of the extender will be required. Violation of this recommendation will result in the inability to achieve the desired effect.
Depending on the method of attachment, extenders are divided into several types. When planning to assemble a homemade version, you need to understand how they differ from each other.
Vacuum extender
Circumference is carried out using a special vacuum chamber. Covers the head of the penis by approximately 3-7 centimeters in circumference. It is considered the most reliable and safe. The risk of injury is practically reduced to zero as there is no risk of compression.
Extender to enlarge the penis
Strap and Handle Extender
The fixing mechanics are almost the same, but the way of fixing is different. In the first case, a loop is used, and in the second, a strap. The difference gives these species a significant difference.
The belt is lined with gauze, so the degree of compression is minimal. The strap, on the contrary, can strongly compress the head, cutting off the blood supply to the reproductive organ, but it remains the most common option.
How to make an extender with your own hands at home?
You can make any of the three types of braces listed. The most difficult to manufacture will be the vacuum one, as it will be necessary to make a chamber. Otherwise, the process will not have significant differences.
Designs
Make a schematic diagram of the device yourself. To make a drawing, simply study the project of a well-known manufacturer. Based on a photograph, drawing, video, they sketch their sketch. The length of the side posts is selected based on the desired result. It can vary from 20 to 25 centimeters.
Required materials and tools
A homemade extender at home is assembled from the same parts as the factory one. Specific materials depend on the type of structure being assembled:
- The limiter ring, straps and clips are in direct contact with the skin and should not cause an allergic reaction. This imposes certain requirements on the material. The ring can be made of thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the width of the penis cross-section. It is best to use a sterile dressing before use, which is changed each time.
- Slats (side rods) are selected in such a way that they can fix the required length for a long time. These can be dies, rods, chrome spokes.
- The vacuum chamber and bulb must be sealed. If this condition is not met, this homemade product will not work.
The difference between the devices is in the fastening element. If you decide to make a variety with a camera, you should give preference not to a plastic bottle as written in some sources, but to purchase a special jar. These are sold in pharmacies. This ensures the creation of an internal vacuum.
Schematic homemade extender
Step-by-step assembly instructions
The manufacture of a strap or loop device involves performing the following sequence of work:
- A part with a diameter of 11 cm is cut from a piece of plywood or other material no more than 10 mm thick. A hole with a circumference of at least 5. 5 cm is made inside. the penis.
- The length of the stems is 20-30 cm. They are completely screwed into the plywood, leaving a little at the top. The entry points are filled with glue.
- They screw a "lamb" into each one.
- Strips are cut from a thin metal plate and holes are drilled in them.
- A forceps made of soft tubes or a strip, which can be used as a wide medical tourniquet, is inserted into the holes.
- Check the reliability of the fastening.
The assembly of the vacuum variety differs only in that a pot with a pear is attached to the end. Not everyone has this device at home, but it is sold free of charge in municipal pharmacies. The radius varies from 13 to 25 mm. It is selected depending on the size of the reproductive organ. The clamp is tightened by a rubber bushing. Its length must be at least 6 cm. It can be made with elastic surgical gloves.
The air will be pumped in thanks to a lamp or connector with a hose. You can use the tonometer element. The shut-off valve is unscrewed and inserted at the other end. This allows you to change the operating principle. The pear will begin to pump instead of pumping air. As you can see, you will have to tinker more than with a strap and loop device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help, which clearly shows how the elements are connected, as well as what materials they are made of.
Penis enlargement extender - strapped under the knee
How and when to use?
The indication for using the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself whether he is satisfied with his reproductive organ or whether he wants to have more. To increase the size of the phallus, you need to use a homemade or factory-made device for at least 4-6 hours a day. The design allows you to hide the extender under clothing. The people around you won't notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit snugly against your pubic bone.
- The foreskin is retracted and a camera, strap or strap is attached to the glans. It is necessary to make sure that the blood flow is not disturbed (no excessive pressure, changes in the shade of the integument).
- Adjust the length of the rods. There should be no painful sensation. The parameter is gradually increased, allowing the organ to get used to the degree of tension, that is, the phallus is trained.
When possible, massage your penis every hour. This allows it to quickly adapt to loads. After the allotted time, the device is removed and the pulp is kneaded with special intimate creams. The device is always thoroughly disinfected and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a home stretcher include the following parameters:
- the opportunity to try the stretcher without purchasing a device;
- relative low cost;
- obtain a design that fully corresponds to the parameters of the phallus.
In fact, there are very few advantages. There are more disadvantages. This includes the inconvenience of the product, since it is quite difficult to independently assemble a model that ideally twists, puts on, takes off and does not press anywhere and does not slip.
Which extender is better - factory or homemade?
To answer this question, simply compare the two types of models:
- A homemade product weighs much more than factory models. This leads to the need to adjust the rods each time for a long time so that they do not compress the head of the penis. Another point is that it is quite difficult to make a vacuum model. By the way, it is generally less effective than homemade ones with a strap and handle.
- The cost, cited as an advantage, is a relative advantage. Today there are Chinese models costing from 1 to 3 thousand rubles. This is no more expensive than a homemade extender. No one will sell half a meter of staples or 20 centimeters of PCB. You will have to buy a lot more material that will remain idle. This makes assembling the device with your own hands profitable only when you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, as it will be inconvenient to use. You have to spend a lot of time putting it on and taking it off, and taking into account that self-massage is recommended periodically, it is also less effective.
One conclusion can be drawn: the factory device is better. To try this penis enlargement method, you can simply buy a cheap model
What risks can there be when using a homemade device?
Experts and experts do not recommend assembling an extender without the appropriate skills. If the device becomes "clumsy", presses, presses, causes discomfort, it is highly not recommended to use it. This can lead to unpleasant consequences.
homemade extender
A well-assembled device will not be less efficient than a factory one. It will just be aesthetically unattractive. Otherwise, there will be no difference, but there is also a nuance here. Many users write that with prolonged use, bruises, compactions and irritations form on the dermis.
This may be caused by poor quality materials. Finding medical silicone in a pharmacy is almost impossible. If one is sold, its properties leave much to be desired and with prolonged contact negative consequences begin to appear.